This brass stock sheet provides a reliable foundation for a wide range of manufacturing and fabrication needs. Its robust composition ensures longevity and consistent performance in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.111" |
| Length | 31" |
| Width | 40" |
Engineered for reliability and performance, this brass stock sheet boasts a precise thickness of 0.111 inches, a substantial length of 31 inches, and a width of 40 inches. Composed of a high-grade brass alloy, it exhibits excellent machinability, corrosion resistance, and electrical conductivity. Its dimensional stability and uniform grain structure make it ideal for precision components, decorative elements, and various industrial assemblies where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Carefully unroll or position the brass sheet, avoiding sharp bends. 3. Proceed with cutting, shaping, or joining operations as required by the design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating brass during welding, leading to loss of strength and potential cracking. | Utilize appropriate welding techniques and filler materials for brass, maintaining controlled heat input to prevent overheating. |
| Improper storage, resulting in surface scratches or oxidation. | Store sheets flat in a dry environment, ideally with protective film or separators to prevent contact damage. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors, Plumbing fixtures, Decorative metalwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||