This premium brass stock sheet offers exceptional durability and corrosion resistance, making it the ideal material for robust pneumatic system components. Its precise dimensions ensure seamless integration and reliable performance.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.072" |
| Length | 34" |
| Width | 27" |
Manufactured under strict quality controls, this brass stock sheet boasts a nominal thickness of 0.072 inches, with a substantial length of 34 inches and a width of 27 inches. The inherent properties of brass, including its excellent machinability, good thermal conductivity, and resistance to corrosion, make it a superior choice for fabricating critical components within pneumatic systems, such as valve bodies, fittings, and manifold blocks. This material ensures long-term operational integrity and minimizes wear in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut the brass sheet to the required dimensions for your pneumatic component. 3. Fabricate the component using appropriate machining techniques, adhering to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-pressure pneumatic lines. | Select a brass alloy specifically rated for the operating pressures of your pneumatic system. Consult material datasheets. |
| Inadequate surface preparation before machining. | Thoroughly clean the brass surface to remove any dirt, oil, or debris that could interfere with machining or lead to component failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pneumatic Valve Bodies, Pneumatic Manifold Blocks, Custom Pneumatic Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||