This high-quality brass stock sheet is specifically formulated for lubricating applications. Its excellent machinability and inherent self-lubricating properties make it ideal for components requiring smooth operation and reduced friction.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.047" |
| Length | 35" |
| Width | 44" |
Engineered for reliability and performance, this brass stock sheet measures 0.047 inches in thickness, 35 inches in length, and 44 inches in width. Composed of a specific brass alloy known for its superior self-lubricating characteristics, this material exhibits excellent wear resistance and a low coefficient of friction. These properties are critical for applications where continuous sliding or rotational movement occurs, minimizing heat generation and prolonging component lifespan.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free of contaminants. 2. Fabricate components according to design specifications using appropriate machining techniques. 3. Install fabricated parts into their intended assemblies, verifying proper fit and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys for high-friction applications. | Select lubricating grade brass specifically designed for reduced friction and wear. |
| Improper machining leading to surface damage. | Utilize appropriate cutting speeds, feeds, and lubrication during fabrication to maintain surface integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bushings and bearings, Wear plates, Gears and sprockets, Slides and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||