This high-grade brass stock sheet, precisely manufactured to 0.031" thickness, 33" length, and 25" width, is ideal for demanding abrading and polishing tasks.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.031" |
| Length | 33" |
| Width | 25" |
Manufactured under strict quality controls, this brass stock sheet exhibits excellent machinability and corrosion resistance, essential for its intended applications. Its 0.031" thickness offers a balance of flexibility and rigidity, suitable for intricate polishing and controlled abrasion. The inherent properties of brass ensure a consistent, non-marring finish when used with appropriate abrasive media. This material is engineered for reliable performance in precision surface preparation and finishing operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface of the brass sheet thoroughly to remove any oils or contaminants. 2. Cut the brass sheet to the desired dimensions using appropriate cutting tools. 3. Prepare the surface for its intended application by sanding, buffing, or polishing as required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong abrasive grit for the desired finish. | Consult abrasive manufacturers' guidelines to select the appropriate grit size for achieving the target surface roughness. |
| Applying excessive heat during machining, leading to material deformation. | Utilize adequate lubrication and cooling methods during cutting and shaping operations to prevent overheating. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision surface finishing, Metal polishing and buffing, Custom abrasive tool fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||