This premium brass stock sheet offers excellent malleability and corrosion resistance, making it ideal for precise abrading and polishing tasks. Its consistent thickness ensures uniform results in critical applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.013" |
| Length | 12" |
| Width | 30" |
Specified by design engineers worldwide, this brass stock sheet is manufactured to exacting standards for superior performance. With a precise thickness of 0.013 inches, a length of 12 inches, and a width of 30 inches, it delivers consistent material properties crucial for fine surface finishing. The inherent malleability of brass allows for intricate shaping and adaptation, while its moderate hardness provides effective abrasive action without excessive wear on tooling. This material is favored for its non-sparking characteristics and excellent conductivity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work surface is clean and free of debris. 2. Position the brass stock sheet accurately according to your project layout. 3. Secure the sheet using appropriate clamping or fixturing methods to prevent movement during processing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during bending or shaping, leading to potential cracking. | Employ gradual bending techniques and consider annealing the brass if complex forms are required. |
| Inadequate surface preparation before polishing, resulting in uneven finishes. | Thoroughly clean and degrease the brass surface to remove all contaminants prior to polishing. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision abrasive media development, Custom polishing pads and fixtures, Specialty metal finishing components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||