This industrial-grade Silicone O-Ring, featuring a brass insert for enhanced conductivity or grounding, provides exceptional sealing integrity. Its specific dimensions ensure a precise fit in critical applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 4.106" |
| Outside Diameter | 3.422" |
| Cross Section | 0.154" |
Manufactured under strict quality controls, this Silicone O-Ring boasts an Inside Diameter of 4.106 inches, an Outside Diameter of 3.422 inches, and a cross-section of 0.154 inches. The inherent properties of silicone, including its wide temperature range (-55°C to +200°C) and excellent resistance to ozone and UV, are complemented by the brass component, which offers electrical conductivity and corrosion resistance. This combination makes it ideal for applications requiring reliable sealing in environments with moderate chemical exposure and elevated temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or debris. 2. Carefully inspect the O-ring for any damage before installation. 3. Gently install the O-ring into the groove, avoiding stretching or twisting; a light lubricant compatible with silicone may be used if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive tension to prevent premature failure and maintain its sealing capability. |
| Using incompatible lubricants or cleaning agents. | Always verify that any lubricant or cleaning agent is compatible with silicone and the specific application environment. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Electrical grounding connections, High-temperature sealing in machinery, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||