This industrial-grade Silicone O-ring features a brass construction, offering superior sealing in demanding environments. Precisely manufactured for optimal performance and durability.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 2.246" |
| Outside Diameter | 2.593" |
| Cross Section | 0.119" |
Engineered for reliability and performance, this Brass Silicone O-ring is constructed from a high-quality silicone compound bonded to a robust brass substrate. With an inside diameter of 2.246 inches, an outside diameter of 2.593 inches, and a cross-section of 0.119 inches, it provides a precise and secure seal. The inherent properties of silicone, such as excellent temperature resistance and flexibility, combined with the inertness and conductivity of brass, make this O-ring suitable for specialized fluid and gas sealing applications where both electrical and thermal considerations are critical. Its design ensures minimal compression set and long service life under moderate pressure and temperature ranges.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully place the O-ring into its designated groove, avoiding excessive stretching or twisting. 3. Apply a light, compatible lubricant if necessary to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong O-ring size, leading to leaks or premature failure. | Always verify the groove dimensions and select an O-ring with compatible measurements (ID, OD, and CS). |
| Over-stretching or twisting the O-ring during installation, causing damage to the sealing surface. | Handle the O-ring with care, ensuring it seats properly in the groove without undue stress. |
| Contaminating the O-ring or mating surfaces with incompatible chemicals or debris. | Maintain a clean working environment and use only approved cleaning agents and lubricants. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Specialty Valve Seals, Electrical Enclosure Gaskets, Temperature Control Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||