This industrial O-ring, expertly crafted from brass-infused silicone, provides robust sealing for critical fluid and gas systems. Its precise dimensions ensure a secure, leak-proof fit in demanding environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.345" |
| Outside Diameter | 8.872" |
| Cross Section | 0.202" |
Purpose-built for heavy-duty applications, this industrial O-ring boasts a precise Inside Diameter of 2.345 inches, an Outside Diameter of 8.872 inches, and a Cross Section of 0.202 inches. The brass infusion enhances its structural integrity and provides excellent resistance to wear and abrasion, while the silicone base offers superior flexibility, a broad operating temperature range (-60°C to 230°C), and excellent resilience to chemicals and environmental factors. This combination makes it ideal for high-pressure hydraulic systems, pneumatic assemblies, and chemical processing equipment where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully lubricate the O-ring with a compatible lubricant. 3. Gently install the O-ring into the groove, avoiding any pinching or stretching. 4. Verify proper seating before assembling mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply a compatible lubricant and use controlled, even pressure to seat the O-ring. |
| Installing into a dirty or damaged groove, compromising the seal. | Thoroughly clean and inspect the groove for any imperfections before O-ring installation. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic Systems, Pneumatic Actuators, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||