This Schedule 80 brass seamless pipe offers superior corrosion resistance and structural integrity. Engineered for high-pressure applications, it's a reliable choice for critical fluid conveyance systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 3.2" |
| Outside Diameter | 2.766" |
| Wall Thickness | 0.100" |
A proven choice for industrial professionals, this 3.2" NPS Schedule 80 seamless brass pipe boasts an accurate outside diameter of 2.766" and a substantial 0.100" wall thickness. Fabricated from high-grade brass, it provides exceptional resistance to a wide range of corrosive media, making it suitable for chemical processing, marine environments, and hydraulic systems. Its seamless construction ensures uniform wall thickness and inherent strength, minimizing leak potential and maximizing service life under demanding operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free of debris, and properly deburred. 2. Apply appropriate pipe sealant or tape to male threads. 3. Carefully thread the pipe into the fitting, ensuring a snug, hand-tight fit before wrench tightening. 4. Tighten with a pipe wrench to achieve a leak-proof seal, avoiding over-tightening which can damage threads or fittings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard pipe sealant on brass fittings. | Always use sealants specifically formulated for brass or compatible with brass alloys to prevent galvanic corrosion. |
| Over-tightening the pipe, stripping threads. | Tighten until snug and then an additional 1/4 to 1/2 turn with a wrench. Excessive force can damage the pipe or fitting. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Corrosive Fluid Transfer, Hydraulic Systems, Marine Applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||