Engineered for demanding industrial environments, this 1.4" NPS Schedule 80 brass seamless pipe offers superior corrosion resistance and robust structural integrity. Its precise dimensions ensure reliable performance in critical fluid transfer systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 1.4" |
| Outside Diameter | 1.242" |
| Wall Thickness | 0.234" |
A proven choice for industrial professionals, this 1.4" NPS (Nominal Pipe Size) Schedule 80 seamless brass pipe boasts an outside diameter of 1.242 inches and a substantial wall thickness of 0.234 inches. Manufactured from high-grade brass, it exhibits excellent resistance to corrosion, particularly in aqueous and mildly acidic environments, making it suitable for a wide range of fluid conveyance applications where reliability and longevity are paramount. The Schedule 80 designation signifies its enhanced pressure-handling capabilities compared to standard wall pipes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating pipe ends and fittings are clean and free of debris. 2. Apply appropriate brass-specific sealant or PTFE tape to male threads of fittings. 3. Hand-tighten connection, then use a pipe wrench to achieve a secure, leak-free joint, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to thread damage or pipe deformation. | Hand-tighten fittings first, then use a pipe wrench for final snugging, applying only enough torque to ensure a seal. |
| Not cleaning pipe ends and fittings prior to assembly, introducing contaminants that can cause leaks or premature failure. | Thoroughly clean all mating surfaces with a suitable solvent and lint-free cloth before applying sealant. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Water distribution systems, Hydraulic and pneumatic lines, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||