This high-quality brass seamless pipe, conforming to Schedule 40 dimensions, offers superior corrosion resistance and durability. Its 4.9" nominal pipe size and 5.510" OD make it ideal for demanding fluid transfer applications where reliability is paramount.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 4.9" |
| Outside Diameter | 5.510" |
| Wall Thickness | 0.487" |
Built to exacting engineering tolerances, this Brass Seamless Pipe boasts a 4.9" NPS (Nominal Pipe Size) with a precise 5.510" Outside Diameter and a substantial 0.487" Wall Thickness, indicative of Schedule 40. The inherent properties of brass, including excellent machinability and inherent resistance to a wide range of corrosive fluids, make this pipe suitable for critical applications. Its seamless construction ensures uniform wall thickness and structural integrity, minimizing the risk of leaks under pressure and vibration. This robust design supports high-pressure fluid handling and long service life in diverse industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of any foreign matter. 2. Apply appropriate flux and solder to the pipe and fitting surfaces. 3. Heat the joint evenly and introduce solder, allowing capillary action to draw it into the gap. 4. Wipe away excess solder while the joint is still molten, then allow it to cool undisturbed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of flux or solder for brass. | Always use a flux specifically designed for brass and a solder with a compatible melting point and composition. |
| Overheating the brass during soldering, leading to excessive oxidation or weakening. | Apply heat judiciously and evenly, focusing on heating both the pipe and fitting to facilitate proper solder flow without scorching the material. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Water distribution systems, Plumbing and HVAC, Industrial fluid conveyance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||