This Schedule 40 brass seamless pipe offers superior corrosion resistance and durability. With a 4.9-inch inside diameter and robust 0.468-inch wall thickness, it's engineered for high-pressure fluid conveyance in critical applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 4.9" |
| Outside Diameter | 5.888" |
| Wall Thickness | 0.468" |
Built to exacting engineering tolerances, this 4.9" nominal pipe size (NPS) Schedule 40 seamless brass pipe features a precise 5.888" outside diameter (OD) and a substantial 0.468" wall thickness. The inherent properties of brass, including excellent machinability, weldability, and resistance to dezincification and corrosion, make it ideal for demanding environments. This configuration ensures high tensile strength and dimensional stability, suitable for conveying a wide range of fluids, including water, oil, and certain chemicals, under moderate to high pressure and temperature conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of obstructions. 2. Apply appropriate flux and solder for brass joining. 3. Heat the joint evenly and allow solder to flow completely around the circumference.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible solder or flux | Always use solder and flux specifically designed for brass pipe to ensure a strong, leak-free joint. |
| Overheating the pipe during soldering | Control heat application to avoid annealing the brass excessively, which can weaken the joint. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Industrial fluid transfer systems, High-pressure plumbing and water distribution, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||