This Schedule 40 seamless brass pipe offers superior corrosion resistance and formability. Its precise dimensions ensure reliable fluid transfer for demanding industrial and plumbing applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 4.4" |
| Outside Diameter | 1.901" |
| Wall Thickness | 0.220" |
Manufactured under strict quality controls, this brass seamless pipe conforms to relevant industry standards for pipe, tubing, and fittings. Featuring a nominal pipe size of 4.4 inches, an outside diameter of 1.901 inches, and a robust wall thickness of 0.220 inches, it provides excellent strength and durability. The inherent properties of brass, including its resistance to corrosion and dezincification, make it an ideal material for applications involving water, mild acids, and other non-oxidizing fluids. Its seamless construction eliminates the weld seam, enhancing structural integrity and preventing potential leak paths, crucial for high-pressure or critical service environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate brass-compatible flux and solder to the joint. 3. Heat the joint evenly and allow capillary action to draw solder into the gap. 4. Wipe away excess solder immediately after cooling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong flux or solder for brass. | Always use a flux specifically designed for brass and a solder with appropriate composition for brass joints, typically tin-lead or lead-free alternatives. |
| Overheating the pipe, causing annealing and weakening. | Apply heat judiciously and focus on heating the fitting and pipe socket evenly to promote proper solder flow without excessive temperature. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Water distribution systems, Hydraulic and pneumatic lines, Marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||