This Schedule 40 seamless brass pipe offers superior corrosion resistance and durability. Its precise dimensions and smooth interior ensure efficient fluid flow in demanding industrial applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 4.3" |
| Outside Diameter | 5.711" |
| Wall Thickness | 0.198" |
Manufactured under strict quality controls, this 4.3" nominal size seamless brass pipe conforms to relevant industry standards for Schedule 40 dimensions. It features a precise outside diameter of 5.711" and a wall thickness of 0.198", ensuring robust structural integrity. Brass's inherent resistance to corrosion makes it an excellent choice for conveying water, chemicals, and other fluids in both high and low-pressure systems. Its ductility allows for easy fabrication and joining, contributing to reliable performance in diverse environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the pipe ends are clean, deburred, and free of any contaminants. 2. Apply appropriate flux and solder to the joint surfaces according to manufacturer recommendations. 3. Heat the joint evenly and allow capillary action to draw the molten solder into the gap. 4. Wipe away any excess solder with a clean cloth before it solidifies.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat during soldering, leading to pipe weakening or oxidation. | Apply heat to the fitting first, allowing it to transfer to the pipe. Maintain a consistent, moderate heat source. |
| Inadequate cleaning of pipe ends and fittings, resulting in poor solder adhesion. | Thoroughly clean all joint surfaces with a wire brush and abrasive cloth until a bright, metallic sheen is visible. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Water distribution systems, Chemical processing lines, Heat exchanger tubing, Marine applications, Decorative architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||