This Schedule 40 brass seamless pipe offers exceptional corrosion resistance and strength. Engineered for reliability in demanding fluid handling and structural applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 3.7" |
| Outside Diameter | 2.193" |
| Wall Thickness | 0.201" |
Built to exacting engineering tolerances, this 3.7-inch nominal size brass pipe features a precise outside diameter of 2.193 inches and a robust 0.201-inch wall thickness, conforming to Schedule 40 dimensions. The inherent properties of brass, including its excellent machinability, high tensile strength, and superior resistance to corrosion, make it ideal for a wide range of applications. This seamless construction guarantees uniform wall thickness and eliminates potential leak paths associated with welded pipes, ensuring optimal performance in pressure systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate joining compound or tape to threads. 3. Hand-tighten fitting, then use a wrench for a final 1/2 to 1 full turn, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect thread sealant for brass. | Utilize thread sealants specifically formulated for brass or non-corrosive applications to prevent galvanic corrosion. |
| Over-tightening threaded connections. | Hand-tighten fittings first, then apply a limited turn with a wrench to avoid stripping threads or damaging the pipe. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Fluid conveyance systems (water, oil, gas), Structural components requiring corrosion resistance, Heat exchangers and plumbing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||