This 3.4" Schedule 40 brass seamless pipe offers superior corrosion resistance and durability. Engineered for precision, it is ideal for a wide range of fluid and gas conveyance systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 3.4" |
| Outside Diameter | 3.059" |
| Wall Thickness | 0.464" |
Built to exacting engineering tolerances, this 3.4" Schedule 40 seamless pipe features a 3.059" outside diameter and a robust 0.464" wall thickness. Manufactured from high-grade brass, it exhibits excellent machinability, inherent antimicrobial properties, and exceptional resistance to dezincification and stress corrosion cracking, making it suitable for potable water systems, HVAC, and instrumentation. Its seamless construction ensures uniform strength and leak-free performance under moderate pressure and temperature conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate flux and solder to fittings and pipe. 3. Heat joint evenly and apply solder until capillary action draws it into the seam.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of flux for brass. | Always use a flux specifically formulated for brass soldering to ensure proper adhesion and prevent oxidation. |
| Overheating the brass during soldering. | Heat the joint uniformly and avoid excessive heat, which can lead to material degradation and compromised joint strength. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Potable water distribution, HVAC systems, Instrumentation and control lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||