This Schedule 40 brass seamless pipe offers superior corrosion resistance and durability for demanding industrial fluid conveyance and structural applications. Engineered for reliability and long service life.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 4.7" |
| Outside Diameter | 4.068" |
| Wall Thickness | 0.381" |
A high-performance industrial component, this 4.7" nominal size brass seamless pipe boasts a precise 4.068" outside diameter and a robust 0.381" wall thickness, conforming to Schedule 40 dimensional standards. Crafted from high-purity brass, it exhibits excellent machinability, weldability, and inherent resistance to a wide range of corrosive media, making it suitable for critical systems where integrity and longevity are paramount. Its seamless construction eliminates potential leak paths common in welded pipes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Prepare ends for desired joining method (e.g., threading, brazing, soldering). 3. Carefully align and connect pipe to mating components, ensuring proper seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible joining methods for brass. | Employ brazing alloys or solders specifically designed for brass, or mechanical fittings rated for brass pipe. |
| Over-tightening threaded connections, leading to galling or cracking. | Use appropriate torque specifications and thread sealant for brass to prevent damage. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Fluid conveyance systems (water, gas, low-pressure steam), Heat exchangers and condensers, Structural components in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||