This robust brass seamless pipe, engineered to Schedule 40 standards, offers exceptional corrosion resistance and durability. Its precise dimensions make it suitable for critical fluid conveyance and structural applications in harsh industrial settings.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 5.8" |
| Outside Diameter | 0.945" |
| Wall Thickness | 0.362" |
A high-performance industrial component, this brass seamless pipe meets stringent Schedule 40 specifications. Featuring a nominal pipe size of 5.8 inches, it boasts an exact outside diameter of 0.945 inches and a substantial wall thickness of 0.362 inches. The inherent properties of brass, including its excellent machinability and resistance to a wide range of chemicals and galvanic corrosion, ensure reliable performance in demanding fluid handling systems, instrumentation lines, and various mechanical assemblies where integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free of debris, and properly deburred. 2. Apply appropriate joint sealant or flux to the pipe ends and fitting threads. 3. Securely thread the pipe into the fitting, ensuring a snug and leak-free connection. 4. For soldered joints, heat the joint evenly and apply solder, allowing capillary action to draw it into the gap.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect sealant or flux for the specific application and fluid. | Consult material compatibility charts and application guidelines to select the correct sealant or flux for brass piping systems. |
| Over-tightening threaded connections, leading to stress fractures or damage to threads. | Tighten threaded joints firmly but avoid excessive force. Use two wrenches if necessary to prevent twisting. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Hydraulic and pneumatic systems, Instrumentation tubing, Corrosive fluid transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||