This Schedule 160 brass seamless pipe offers superior strength and corrosion resistance for critical applications. Precisely manufactured to exacting standards, it ensures reliable performance in demanding environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 4.6" |
| Outside Diameter | 1.177" |
| Wall Thickness | 0.105" |
Trusted by engineers across multiple sectors, this Brass Seamless Pipe, Schedule 160, boasts a 4.6" nominal pipe size with a precise 1.177" outside diameter and a substantial 0.105" wall thickness. Its inherent brass properties provide excellent corrosion resistance, particularly to saltwater and many chemicals, making it suitable for demanding fluid conveyance systems. The seamless construction eliminates weld defects, ensuring maximum integrity and pressure containment for high-stress applications in marine, chemical processing, and instrumentation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate sealant or tape to the male threads of fittings. 3. Hand-tighten the fitting, then use a wrench to tighten an additional 1-2 turns to achieve a secure seal, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening threaded connections. | Use a calibrated torque wrench or hand-tighten followed by a specific wrench turn based on fitting type and manufacturer recommendations to prevent thread damage and leaks. |
| Using incompatible thread sealants or tapes. | Consult material compatibility charts to ensure the chosen sealant or tape is suitable for brass and the specific fluid being conveyed. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: Marine fluid systems (potable water, hydraulics), Chemical processing and instrumentation, High-pressure pneumatic lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||