This Schedule 160 brass seamless pipe offers exceptional strength and corrosion resistance. Precisely manufactured to tight tolerances, it ensures reliable performance in critical fluid handling systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 2.6" |
| Outside Diameter | 1.716" |
| Wall Thickness | 0.270" |
Engineered for reliability and performance, this brass seamless pipe is manufactured to demanding specifications. Featuring a nominal pipe size of 2.6 inches, it boasts a precise outside diameter of 1.716 inches and a substantial wall thickness of 0.270 inches, corresponding to Schedule 160. The inherent properties of brass, including excellent corrosion resistance to a wide range of fluids and good machinability, make this pipe suitable for environments where durability and integrity are paramount. Its robust construction is ideal for high-pressure applications and systems requiring long service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from burrs. 2. Apply appropriate flux and solder for brass joining. 3. Heat joint evenly and apply solder, allowing capillary action to draw it into the seam.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect flux or solder for brass. | Always use a flux specifically designed for brass and a solder with a compatible melting point. |
| Overheating the brass during soldering. | Apply heat judiciously to avoid compromising the material's temper and strength. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure fluid conveyance, Instrumentation lines, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||