This Schedule 80 brass seamless pipe offers superior corrosion resistance and high pressure handling capabilities. Engineered for reliability in severe industrial settings, ensuring durable fluid conveyance.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 4.8" |
| Outside Diameter | 3.255" |
| Wall Thickness | 0.133" |
Designed for demanding industrial environments, this Schedule 80 brass seamless pipe features a nominal pipe size of 4.8 inches, an outside diameter of 3.255 inches, and a robust wall thickness of 0.133 inches. Constructed from high-quality brass alloys, it provides exceptional resistance to a wide range of corrosive media, including saltwater, mild acids, and alkalis. The seamless construction ensures uniform wall thickness, eliminating potential weak points and guaranteeing integrity under significant internal pressures and external stresses. Its material properties make it suitable for applications requiring longevity and minimal maintenance in challenging chemical processing, marine, and oil & gas sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free from any foreign matter. 2. Apply appropriate flux and solder or use approved fittings for joining. 3. Carefully support the pipe during and after installation to prevent sagging or undue stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect flux or solder for brass. | Always use flux and solder specifically designed for brass to ensure proper bonding and corrosion resistance. |
| Overheating the pipe during soldering, leading to annealing and reduced strength. | Apply heat judiciously and only to the fitting, allowing heat to transfer to the pipe. Avoid direct, prolonged flame contact with the pipe wall. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Corrosive fluid transfer in chemical plants, Marine plumbing and ballast systems, High-pressure hydraulic lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||