This Schedule 80 brass seamless pipe offers exceptional strength and corrosion resistance. With a precise 2.3" IPS size, 5.457" OD, and 0.248" wall thickness, it's engineered for demanding fluid handling applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 2.3" |
| Outside Diameter | 5.457" |
| Wall Thickness | 0.248" |
Engineered for reliability and performance, this seamless brass pipe adheres to Schedule 80 dimensional standards, ensuring robust pressure handling capabilities. The 2.3" IPS nominal pipe size translates to a 5.457" actual outside diameter and a substantial 0.248" wall thickness, providing superior structural integrity. Brass offers inherent excellent corrosion resistance, particularly against water, mild acids, and various chemicals, making it ideal for potable water systems, industrial process lines, and marine applications. Its excellent machinability further facilitates custom fittings and ease of installation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe preparation, including deburring and cleaning. 2. Apply appropriate threading compound or sealant to male threads. 3. Carefully thread the pipe into the fitting, ensuring a straight and snug fit. 4. Tighten to the manufacturer's recommended torque specifications, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect threading compound for brass fittings. | Always use threading compounds specifically formulated for brass to prevent dezincification and ensure a leak-free seal. |
| Over-tightening the pipe, leading to thread damage. | Adhere to recommended torque values; hand-tighten plus a specified number of turns is often sufficient for brass. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: High-pressure fluid transfer systems, Corrosive chemical processing, Potable water distribution networks, Marine and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||