This Schedule 80 brass seamless pipe offers superior strength and corrosion resistance. Engineered for high-pressure applications, its precise dimensions ensure reliable performance in critical fluid transfer and mechanical systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 2.2" |
| Outside Diameter | 5.135" |
| Wall Thickness | 0.262" |
Precision-manufactured to tight tolerances, this Brass Seamless Pipe meets Schedule 80 specifications. The 2.2" nominal pipe size (NPS) corresponds to a nominal outside diameter (OD) of 5.135 inches and a substantial wall thickness of 0.262 inches, resulting in a minimum internal diameter (ID) of 4.611 inches. The inherent properties of brass, including excellent corrosion resistance to a wide range of media and good machinability, make it suitable for applications involving water, mild chemicals, and oil. Its robust construction can withstand significant internal pressures and external stresses, ensuring operational integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free from defects. 2. Properly align pipe sections for connection. 3. Secure connections using appropriate fittings and joining methods (e.g., brazing, soldering, or threaded fittings) ensuring leak-free seals.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fittings for brass pipe. | Always use fittings specifically designed or rated for brass pipe to prevent galvanic corrosion or mechanical failure. |
| Over-tightening threaded connections. | Tighten threaded brass fittings firmly but avoid excessive force to prevent stripping threads or cracking the pipe/fitting. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: High-pressure fluid conveyance systems, Instrumentation and control lines, Corrosive fluid handling (check compatibility).
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||