This Schedule 80 brass seamless pipe is engineered for superior performance in demanding environments. Its robust construction ensures reliability in critical fluid and gas transfer systems, offering excellent corrosion resistance.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 2.2" |
| Outside Diameter | 1.607" |
| Wall Thickness | 0.434" |
Purpose-built for heavy-duty applications, this 2.2-inch nominal size brass seamless pipe adheres to stringent Schedule 80 dimensional standards. It features a precise 1.607-inch outside diameter and a substantial 0.434-inch wall thickness, yielding exceptional strength and pressure containment capabilities. The inherent properties of brass, including excellent corrosion resistance to a wide range of media and good machinability, make this pipe an optimal choice for systems exposed to corrosive fluids, elevated temperatures, and high pressures in industrial, marine, and chemical processing sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate brass-compatible threading compound or sealant to male threads. 3. Thread the pipe firmly into the fitting, ensuring a secure connection without overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible threading compounds that can corrode brass. | Always use threading compounds specifically rated for brass or non-ferrous metals. |
| Overtightening fittings, which can cause stress fractures in the brass pipe. | Tighten fittings until snug, then an additional quarter to half turn, depending on the fitting type. Avoid excessive force. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: High-pressure fluid transfer, Marine and offshore applications, Chemical processing lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||