This Schedule 80 seamless brass pipe offers superior corrosion resistance and mechanical strength for demanding industrial applications. Precisely manufactured to exacting standards for reliable fluid and gas conveyance.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 1.6" |
| Outside Diameter | 2.784" |
| Wall Thickness | 0.395" |
A proven choice for industrial professionals, this 1.6" nominal pipe size Schedule 80 seamless brass pipe features a precise outside diameter of 2.784" and a substantial wall thickness of 0.395". The inherent properties of brass, including excellent corrosion resistance to many chemicals, good machinability, and ductility, make it suitable for moderate to high-pressure applications in chemical processing, marine environments, and general fluid handling where galvanic corrosion is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate solvent cement and primer to both fitting and pipe ends. 3. Insert pipe into fitting with a slight twist and hold firmly for 30 seconds to prevent slippage. 4. Remove excess cement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of solvent cement for brass fittings. | Always consult the fitting manufacturer's recommendations for the specific type of solvent cement and primer to use with brass. |
| Insufficient curing time before applying pressure. | Allow the solvent cement to cure completely according to the manufacturer's specifications before introducing any system pressure. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Chemical Processing, Marine and Offshore, Water Distribution Systems, Heat Exchangers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||