This Schedule 80 seamless brass pipe offers superior strength and corrosion resistance for demanding industrial applications. Its robust construction ensures reliable performance in high-pressure fluid handling systems.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 1.3" |
| Outside Diameter | 4.411" |
| Wall Thickness | 0.454" |
A high-performance industrial component, this 1.3" nominal size brass seamless pipe features a precise 4.411" outside diameter and a substantial 0.454" wall thickness, conforming to Schedule 80 specifications. Manufactured from high-grade brass, it exhibits excellent machinability, inherent corrosion resistance against a wide range of chemicals and fluids, and good thermal conductivity. This combination of material properties and dimensional integrity makes it suitable for critical fluid transport, heat exchange, and mechanical applications where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate brass-compatible sealant or thread tape to male threads. 3. Carefully thread the pipe into the fitting, ensuring a snug fit without overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect sealant incompatible with brass. | Utilize sealants specifically designed for brass or yellow metal fittings to prevent galvanic corrosion. |
| Overtightening threaded connections, leading to stress fractures. | Tighten connections until snug, then apply an additional quarter to half turn. Torque specifications should be consulted for critical applications. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: High-pressure fluid conveyance, Heat exchanger tubing, Instrumentation lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||