This Schedule 80 brass seamless pipe offers superior corrosion resistance and high tensile strength, making it ideal for demanding fluid transfer systems. Its precise dimensions ensure reliable performance in critical industrial settings.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 0.6" |
| Outside Diameter | 2.581" |
| Wall Thickness | 0.260" |
Precision-manufactured to tight tolerances, this Schedule 80 seamless brass pipe boasts a nominal pipe size of 0.6 inches, an outside diameter of 2.581 inches, and a substantial wall thickness of 0.260 inches. Fabricated from high-quality brass alloys, it exhibits excellent resistance to corrosion, dezincification, and erosion, making it suitable for a wide range of fluid handling applications, including potable water systems, chemical processing, and marine environments. The seamless construction eliminates the risk of seam failure, providing enhanced integrity under high pressure and fluctuating temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate pipe sealant or PTFE tape to the male threads. 3. Thread the pipe into the fitting, tightening securely to the manufacturer's recommended torque specification.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper pipe sealant for brass fittings. | Always use sealants specifically rated for brass and the intended application (e.g., potable water, chemical compatibility). |
| Over-tightening threaded connections. | Refer to torque charts or hand-tighten plus a specified number of turns to avoid damaging threads or the pipe. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Potable Water Distribution, Chemical Processing Equipment, Marine and Offshore Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||