This heavy-duty brass seamless pipe, Schedule 40, offers superior corrosion resistance and durability. Engineered for demanding industrial and plumbing applications requiring long-term reliability and performance.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 5.6" |
| Outside Diameter | 0.953" |
| Wall Thickness | 0.201" |
Purpose-built for heavy-duty applications, this 5.6" nominal pipe size (NPS) seamless brass pipe adheres to Schedule 40 specifications, ensuring consistent wall thickness of 0.201" for a precise outside diameter of 0.953". The inherent dezincification resistance and excellent machinability of brass make it ideal for fluid conveyance systems exposed to corrosive substances or requiring intricate fabrication. Its seamless construction eliminates weld-related vulnerabilities, providing enhanced integrity under pressure and vibration. Suitable for water distribution, chemical processing, and HVAC systems where longevity and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from debris. 2. Apply appropriate brass-compatible sealant or solder to joining surfaces. 3. Securely join pipe sections using approved fittings and techniques, ensuring a leak-tight seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect sealant or solder for brass. | Always use sealants or solders specifically formulated for brass to prevent corrosion and ensure proper bonding. |
| Over-tightening fittings, leading to pipe deformation. | Tighten fittings to the manufacturer's recommended torque specifications to avoid damaging the pipe's integrity. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Potable water systems, Chemical processing lines, Marine applications, Instrumentation tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||