This Schedule 40 brass seamless pipe offers superior corrosion resistance and durability. Precisely manufactured to exacting standards for demanding industrial fluid conveyance and structural applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 3.9" |
| Outside Diameter | 2.270" |
| Wall Thickness | 0.203" |
A high-performance industrial component, this brass seamless pipe conforms to Schedule 40 dimensions, featuring a nominal pipe size of 3.9 inches, an actual outside diameter of 2.270 inches, and a robust wall thickness of 0.203 inches. The inherent properties of brass, including excellent corrosion resistance to a wide range of fluids and good machinability, make it suitable for applications where long-term reliability is paramount. Its seamless construction ensures uniform wall thickness and pressure containment capabilities, minimizing leak potential.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to male threads. 3. Tighten connections securely, avoiding overtightening to prevent thread damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible thread sealant with brass fittings. | Utilize thread sealants specifically rated for brass to prevent chemical reactions and ensure a reliable seal. |
| Overtightening connections, leading to thread stripping. | Tighten connections firmly until snug, then give an additional quarter to half turn. Use a torque wrench for critical applications if specified. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Fluid conveyance systems (water, certain chemicals), Instrumentation tubing, Mechanical components and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||