This Schedule 40 brass seamless pipe offers superior corrosion resistance and mechanical strength for demanding industrial fluid transfer and conveying systems. Its precise dimensions ensure reliable performance in critical applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 3.5" |
| Outside Diameter | 4.643" |
| Wall Thickness | 0.355" |
A high-performance industrial component, this 3.5-inch IPS Schedule 40 seamless pipe is manufactured from premium brass, known for its excellent machinability, inherent corrosion resistance, and durability. Featuring an outside diameter of 4.643 inches and a substantial wall thickness of 0.355 inches, it meets stringent ASME B36.19 specifications. This robust construction ensures it can withstand moderate pressures and temperatures, making it suitable for a wide array of applications including water distribution, chemical processing, and HVAC systems where longevity and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of contaminants. 2. Apply appropriate flux and solder to the joint area. 3. Heat the joint evenly and allow capillary action to draw solder into the connection. 4. Wipe away excess solder immediately after cooling begins.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of flux or solder for brass. | Always use a flux specifically designed for brass and a solder with a melting point suitable for the operating temperature of the system. |
| Overheating the brass pipe during soldering. | Apply heat judiciously and evenly. Excessive heat can weaken the brass and lead to joint failure. Watch for the solder to flow freely, indicating proper temperature. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Potable water distribution systems, Chemical processing and transfer lines, Industrial fluid conveying, HVAC and refrigeration circuits, Decorative architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||