This Schedule 40 brass seamless pipe offers exceptional corrosion resistance and durability. Engineered for reliable performance in demanding industrial environments, it ensures efficient fluid conveyance and structural integrity.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 2.9" |
| Outside Diameter | 5.784" |
| Wall Thickness | 0.405" |
Purpose-built for heavy-duty applications, this brass seamless pipe conforms to stringent Schedule 40 dimensional standards. It features a nominal pipe size (NPS) of 2.9 inches, an actual outside diameter (OD) of 5.784 inches, and a robust wall thickness of 0.405 inches. The inherent properties of brass, including its excellent corrosion resistance against a wide range of fluids and its high tensile strength, make it suitable for demanding chemical processing, hydraulic systems, and high-pressure fluid transfer where longevity and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to male threaded connections. 3. Tighten connections securely, avoiding overtightening to prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect thread sealant for the fluid being conveyed. | Consult chemical compatibility charts to select a sealant resistant to the specific fluid and operating conditions. |
| Overtightening connections, leading to pipe deformation or failure. | Use torque specifications where available or tighten connections until snug and then an additional quarter-turn for threaded fittings, or follow manufacturer's recommended torque for compression fittings. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Industrial Fluid Transfer, Hydraulic Systems, Structural Support Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||