This 2.9" IPS Schedule 40 seamless brass pipe offers superior corrosion resistance and durability. Ideal for demanding industrial fluid transfer, heat exchange, and structural applications where reliability is paramount.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 2.9" |
| Outside Diameter | 5.097" |
| Wall Thickness | 0.296" |
Built to exacting engineering tolerances, this 2.9" IPS Schedule 40 seamless brass pipe features a precise 5.097" outside diameter and a robust 0.296" wall thickness, ensuring high structural integrity and consistent flow characteristics. Manufactured from high-grade brass alloys, it exhibits exceptional resistance to a wide range of corrosive media, including water, mild acids, and various industrial chemicals. This makes it an optimal choice for critical fluid conveyance systems, heat exchangers, and decorative architectural elements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of contaminants. 2. Apply appropriate flux and solder to fittings and pipe ends. 3. Heat the joint evenly and allow capillary action to draw the solder into the gap. 4. Wipe away excess solder immediately with a clean cloth.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible flux or solder for brass. | Always use flux and solder specifically rated for brass to ensure a strong, leak-free joint. |
| Overheating the brass during soldering. | Apply heat judiciously to avoid excessive temperatures, which can degrade the brass and the solder. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Industrial fluid conveyance (water, chemicals), Heat exchangers and plumbing systems, Decorative and structural architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||