Engineered for robust performance, this Schedule 40 brass seamless pipe offers exceptional corrosion resistance and structural integrity. Its precise dimensions ensure reliable fluid conveyance in critical industrial applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 2.8" |
| Outside Diameter | 1.358" |
| Wall Thickness | 0.469" |
Designed for demanding industrial environments, this 2.8-inch nominal size brass seamless pipe adheres to Schedule 40 specifications. It features a precise outside diameter of 1.358 inches and a substantial wall thickness of 0.469 inches, providing superior strength and pressure handling capabilities. The inherent properties of brass, including excellent corrosion resistance to a wide range of fluids and good machinability, make this pipe ideal for applications involving water distribution, hydraulic systems, and chemical processing where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate flux and solder to joint surfaces. 3. Heat joint evenly and apply solder until it flows completely around the joint.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect flux for brass soldering. | Always use a flux specifically formulated for brass or copper alloys. |
| Overheating the pipe, leading to material degradation. | Apply heat judiciously to the joint, focusing on even distribution, and allow the solder to melt from the heat of the metal, not direct flame. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Fluid Conveyance Systems, Hydraulic Lines, Corrosive Fluid Transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||