This Schedule 40 brass seamless pipe, with a 2.5" IPS nominal size, offers superior corrosion resistance and a smooth internal surface for efficient fluid conveyance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 2.5" |
| Outside Diameter | 5.824" |
| Wall Thickness | 0.171" |
Specified by design engineers worldwide, this seamless brass pipe conforms to rigorous industry standards for its precise dimensions and material integrity. Featuring a 2.5" IPS nominal size with an actual Outside Diameter of 5.824" and a robust Wall Thickness of 0.171", it ensures substantial structural integrity and pressure handling capabilities. The brass alloy provides excellent machinability, inherent corrosion resistance against a wide range of fluids, and non-sparking properties, making it suitable for various fluid transfer systems and precision applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the pipe ends are clean, deburred, and free of debris. 2. Employ appropriate joining methods such as soldering, brazing, or threaded fittings compatible with brass. 3. Properly support the pipe to prevent sagging and stress on joints.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect joining methods that compromise the pipe's integrity or compatibility with brass. | Always use joining techniques and consumables specifically rated for brass and the intended service pressure and temperature. |
| Inadequate pipe support leading to stress concentrations and potential failure. | Install adequate and correctly spaced pipe supports to maintain alignment and distribute weight effectively. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Hydraulic and pneumatic systems, Water and gas distribution, Instrumentation tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||