This premium brass seamless pipe, conforming to Schedule 40 specifications, offers exceptional corrosion resistance and durability. Its precise dimensions ensure reliable fluid conveyance and robust structural integrity in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 1.6" |
| Outside Diameter | 2.313" |
| Wall Thickness | 0.190" |
Built to exacting engineering tolerances, this 1.6" nominal size brass seamless pipe features an outside diameter of 2.313" and a precise wall thickness of 0.190". The inherent properties of brass, including excellent machinability and resistance to dezincification, make it suitable for a wide array of applications. Its seamless construction guarantees uniform wall thickness, eliminating weak points common in welded pipes and ensuring superior performance under pressure. This pipe is engineered for applications requiring reliable fluid handling, heat transfer, and structural support where corrosion is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all connecting surfaces are clean and free of debris. 2. Apply appropriate brass-specific thread sealant or tape to male threads. 3. Hand-tighten the fitting, then use a pipe wrench to tighten an additional 1-2 turns to achieve a secure seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible thread sealant that can degrade brass. | Always use sealants specifically rated for brass or copper alloys to prevent corrosion. |
| Over-tightening fittings, which can crack the pipe or fitting. | Tighten fittings firmly but avoid excessive force; a secure seal is sufficient. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Hydraulic systems, Instrumentation tubing, Decorative structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||