This premium brass seamless pipe, conforming to Schedule 40 standards, offers superior corrosion resistance and durability. Its precise dimensions make it ideal for demanding fluid and gas transfer applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 1.2" |
| Outside Diameter | 4.255" |
| Wall Thickness | 0.207" |
Manufactured under strict quality controls, this brass seamless pipe features a nominal pipe size of 1.2 inches, an actual outside diameter of 4.255 inches, and a wall thickness of 0.207 inches. Constructed from high-quality brass alloy, it exhibits excellent resistance to corrosion, dezincification, and erosion, making it suitable for potable water systems, gas lines, and various industrial fluid handling where chemical compatibility and longevity are paramount. The seamless construction ensures uniform wall thickness and superior pressure containment capabilities.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Deburr and chamfer pipe ends to facilitate fitting insertion. 3. Apply appropriate flux and solder for brass joining methods, or utilize compatible compression fittings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of flux or solder for brass. | Always use a flux specifically designed for brass and a solder with a suitable melting point for brass applications to ensure a strong, leak-free joint. |
| Improperly deburring or chamfering pipe ends. | Thoroughly deburr and chamfer the inside and outside edges of the pipe ends to prevent damage to O-rings in compression fittings and to ensure smooth insertion during soldering. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Potable water distribution systems, Natural gas and fuel lines, Industrial fluid and chemical transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||