This Schedule 160 brass seamless pipe offers superior integrity and corrosion resistance. Precisely manufactured for demanding applications requiring robust performance and extended service life.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 3.9" |
| Outside Diameter | 2.305" |
| Wall Thickness | 0.434" |
Manufactured under strict quality controls, this brass seamless pipe conforms to rigorous industry standards for pressure vessel and fluid transfer applications. Featuring a nominal pipe size of 3.9 inches, it boasts an actual outside diameter of 2.305 inches and a substantial wall thickness of 0.434 inches, classifying it as Schedule 160. The inherent properties of brass, including excellent machinability, moderate strength, and high resistance to dezincification and general corrosion, make it suitable for a wide array of industrial environments, especially those involving potable water, steam, and certain chemical solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of any debris. 2. Prepare mating fittings according to manufacturer specifications, typically involving cleaning and fluxing if soldering. 3. Join pipe and fitting using appropriate joining method (e.g., soldering, brazing, or threaded connections), ensuring a secure and leak-free seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect joining method for brass pipe. | Always consult material compatibility charts and use methods specifically recommended for brass, such as silver brazing or lead-free soldering, to avoid weakening the joint or damaging the material. |
| Over-tightening threaded connections, leading to cracking. | Apply thread sealant and tighten threaded brass fittings moderately. Over-tightening can induce stress and fracture the pipe or fitting, especially in thinner-walled sections. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure fluid transfer systems, Marine and offshore applications, Industrial heat exchangers and condensers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||