Engineered for extreme pressure and corrosive environments, this Schedule 160 brass seamless pipe delivers exceptional performance. Its robust construction ensures reliability in critical applications requiring superior material integrity.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 5.9" |
| Outside Diameter | 4.496" |
| Wall Thickness | 0.417" |
Trusted by engineers across multiple sectors, this Schedule 160 seamless brass pipe boasts an impressive 4.496" outside diameter with a substantial 0.417" wall thickness, resulting in a nominal 5.9" inside diameter. Manufactured from high-grade brass alloy, it offers excellent corrosion resistance, particularly against saltwater and certain chemicals, along with good ductility and strength. This combination makes it suitable for high-pressure fluid conveyance systems, marine applications, and specialized structural components where thermal conductivity and non-sparking properties are advantageous.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper cleaning of pipe ends and fittings to remove any debris or contaminants. 2. Apply appropriate threading compound or PTFE tape to male threads of fittings. 3. Hand-tighten fittings onto the pipe, then use a pipe wrench to tighten an additional 1-2 turns, avoiding overtightening to prevent cracking. 4. For welded connections, follow ASME B31.3 guidelines for preheating, welding, and post-weld heat treatment as required by the specific brass alloy and service conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect threading compound for brass. | Always use a threading compound specifically formulated for brass or a compatible PTFE tape to prevent galvanic corrosion and ensure a proper seal. |
| Overtightening fittings, leading to cracks. | Tighten fittings by hand first, then use a wrench for a final 1-2 turns. Refer to manufacturer specifications for torque limits if available. |
| Not considering the specific brass alloy's compatibility with the fluid. | Verify that the brass alloy used in the pipe is resistant to the specific chemicals or fluids it will be conveying to prevent premature degradation or contamination. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure fluid and gas transfer systems, Marine and offshore equipment, Heat exchangers and plumbing systems, Decorative and structural applications requiring corrosion resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||