This Schedule 160 brass seamless pipe delivers exceptional structural integrity and corrosion resistance. Engineered for high-pressure fluid conveyance in critical industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 5.5" |
| Outside Diameter | 6.218" |
| Wall Thickness | 0.134" |
A high-performance industrial component, this brass seamless pipe is manufactured to exacting standards, offering superior durability and reliability. With a nominal pipe size of 5.5 inches, it features a precise outside diameter of 6.218 inches and a substantial wall thickness of 0.134 inches, corresponding to Schedule 160. The inherent properties of brass, including excellent corrosion resistance to a wide range of media and good thermal conductivity, make it ideal for demanding applications where fluid purity and system integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or flux and solder for the specific joint type. 3. Carefully align and secure the pipe to prevent stress on the connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible thread sealant or flux for brass. | Always use sealants and fluxes specifically designed for brass to prevent corrosion or premature failure. |
| Overheating during soldering, leading to material degradation. | Employ controlled heating techniques to achieve a proper solder joint without compromising the brass integrity. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure fluid transfer systems, Chemical processing equipment, Marine and offshore applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||