This Schedule 160 brass seamless pipe offers superior strength and durability. With precise dimensions and excellent corrosion resistance, it is engineered for critical fluid handling and structural support in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 4.6" |
| Outside Diameter | 4.126" |
| Wall Thickness | 0.393" |
Specified by design engineers worldwide, this 4.6" IPS (4.126" OD) Schedule 160 seamless brass pipe features a substantial 0.393" wall thickness. Manufactured from high-quality brass alloys, it exhibits excellent corrosion resistance, high tensile strength, and malleability, making it suitable for high-pressure fluid conveyance, heat exchangers, and specialized structural components where performance and longevity are paramount. Its seamless construction ensures uniform wall thickness and superior leak integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe support spacing to prevent sagging and stress concentration. 2. Clean pipe ends thoroughly with an approved brass cleaner before joining. 3. Utilize appropriate joining methods (e.g., brazing, welding, or threaded fittings) as dictated by application pressure and fluid compatibility, adhering to industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate pipe support leading to excessive bending stress. | Consult ASME B31.3 or relevant piping codes for correct support spacing based on pipe size, material, and operational conditions. |
| Using incompatible joining materials or flux with brass. | Always verify that brazing alloys, welding consumables, and fluxes are specifically rated for brass to prevent joint failure and corrosion. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure fluid and gas transfer systems, Heat exchangers and condenser tubing, Specialized structural components in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||