This Schedule 160 seamless brass pipe offers superior strength and durability for high-pressure applications. Engineered for exceptional performance in corrosive environments, ensuring reliable fluid conveyance.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 4.2" |
| Outside Diameter | 5.526" |
| Wall Thickness | 0.494" |
Built to exacting engineering tolerances, this 4.2-inch nominal size seamless brass pipe features an outside diameter of 5.526 inches and a substantial wall thickness of 0.494 inches. The high copper content of brass provides excellent corrosion resistance against a wide range of fluids and atmospheric conditions, while the seamless construction eliminates potential leak paths inherent in welded pipes. This robust design is critical for applications demanding consistent pressure containment and structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both the pipe ends and the mating fittings to remove any debris, oil, or contaminants. 2. Apply appropriate flux and solder to the joint area, ensuring complete coverage of the pipe end and fitting socket. 3. Heat the joint evenly and introduce solder, allowing it to capillary into the space between the pipe and fitting until a complete fillet is formed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect flux or solder for brass. | Always use flux and solder specifically designed for brass to ensure proper bonding and corrosion resistance. |
| Overheating the pipe during soldering. | Apply heat judiciously to the fitting socket, allowing the heat to transfer to the pipe, to prevent material degradation and flux burn-off. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure fluid transfer systems, Marine and offshore applications, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||