This Schedule 160 brass seamless pipe offers exceptional strength and corrosion resistance for demanding fluid handling. Its precise dimensions ensure reliable performance in critical industrial applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 2.8" |
| Outside Diameter | 1.948" |
| Wall Thickness | 0.303" |
Specified by design engineers worldwide, this Schedule 160 seamless brass pipe is engineered for superior performance. With an outside diameter of 1.948 inches and a substantial wall thickness of 0.303 inches, it achieves a nominal pipe size of 2.8 inches. The inherent corrosion resistance and excellent thermal conductivity of brass make this pipe suitable for applications involving aggressive media, high temperatures, and precise fluid control, including hydraulic systems and specialized chemical processing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Carefully align pipe sections for connection, utilizing appropriate joining methods (e.g., brazing, soldering, or threaded fittings). 3. Apply joint sealant or filler material as per application requirements and manufacturer recommendations for a leak-proof seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of pipe ends before joining. | Thoroughly clean pipe ends with a suitable solvent and abrasive cloth to remove any oxidation or contaminants that could compromise joint integrity. |
| Overheating during brazing or soldering, leading to material degradation. | Utilize controlled heating methods and appropriate flux to achieve proper joint fill without excessive heat application, preserving the brass material's properties. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure hydraulic systems, Chemical processing and transfer lines, Marine and offshore fluid conduits.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||