This 2.5" Schedule 160 brass seamless pipe offers superior strength and corrosion resistance. Engineered for high-pressure applications, it ensures reliable fluid and gas conveyance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 2.5" |
| Outside Diameter | 3.515" |
| Wall Thickness | 0.294" |
Manufactured under strict quality controls, this 2.5" Nominal Pipe Size (NPS) seamless pipe boasts an outside diameter (OD) of 3.515 inches and a substantial wall thickness of 0.294 inches, corresponding to Schedule 160. Constructed from premium brass alloys, it exhibits excellent corrosion resistance, especially to saltwater and many chemicals, along with good machinability and ductility. This robust construction makes it suitable for high-pressure hydraulic systems, chemical processing, marine applications, and demanding fluid transfer lines where integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of foreign matter. 2. Apply appropriate flux and solder to joint surfaces. 3. Heat joint evenly and introduce solder, allowing capillary action to draw it into the gap. 4. Wipe away excess solder immediately with a clean, damp cloth.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of pipe ends and fittings before soldering. | Thoroughly clean all joint surfaces with an abrasive cloth or wire brush to remove oxidation and contaminants, ensuring proper solder flow. |
| Uneven heating of the joint during soldering. | Apply heat to the base of the fitting, allowing heat to transfer to the pipe, ensuring uniform temperature for optimal solder wicking. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure hydraulic systems, Chemical processing and transfer, Marine and offshore environments, Industrial fluid conveyance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||