Engineered for demanding applications, this Schedule 160 brass seamless pipe offers superior strength and corrosion resistance. Its precise dimensions ensure reliable performance in critical fluid transfer and structural roles.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 2.2" |
| Outside Diameter | 4.776" |
| Wall Thickness | 0.131" |
Trusted by engineers across multiple sectors, this Schedule 160 brass seamless pipe features a 2.2-inch nominal pipe size, a precise 4.776-inch outside diameter, and a robust 0.131-inch wall thickness. Manufactured from high-grade brass, it exhibits excellent machinability and inherent resistance to a wide range of corrosive media, making it suitable for hydraulic systems, chemical processing, and marine environments where durability and fluid integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe end preparation, including deburring and cleaning. 2. Apply appropriate sealant or tape to threaded connections, if applicable, following manufacturer's guidelines. 3. Carefully align and tighten fittings to achieve a secure, leak-free joint, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings or joining methods. | Always verify that fittings and joining methods are specifically rated for brass pipe and the intended service conditions (pressure, temperature, fluid type). |
| Insufficient support for long pipe runs. | Install adequate pipe supports at recommended intervals to prevent sagging, vibration, and stress on the joints. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure hydraulic systems, Chemical and petrochemical processing, Marine and offshore applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||