This Schedule 160 seamless brass pipe offers superior strength and corrosion resistance for critical industrial fluid handling. Engineered for high-pressure applications where reliability is paramount.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 1.5" |
| Outside Diameter | 3.566" |
| Wall Thickness | 0.233" |
Designed for demanding industrial environments, this 1.5" NPS (Nominal Pipe Size) seamless brass pipe boasts an impressive 3.566" outside diameter and a robust 0.233" wall thickness, conforming to Schedule 160. Crafted from high-quality brass, it exhibits excellent corrosion resistance, particularly against saltwater and certain chemicals, making it suitable for marine, chemical processing, and high-pressure fluid transfer systems. Its seamless construction ensures uniform strength and integrity, minimizing leak points and stress concentrations under extreme operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of debris. 2. Apply appropriate flux and solder to both the fitting socket and the pipe end. 3. Insert pipe fully into the fitting socket and heat evenly. 4. Allow solder to flow completely around the joint before cooling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of solder for brass. | Always use a solder specifically rated for brass or copper alloys and ensure it's compatible with lead-free requirements if applicable. |
| Inadequate heating of the joint, leading to poor solder flow. | Apply heat evenly to both the fitting and the pipe to achieve the correct temperature for capillary action and proper solder bonding. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure fluid transfer systems, Marine and offshore applications, Chemical processing pipelines, Instrumentation tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||