This Schedule 160 seamless brass pipe offers exceptional strength and corrosion resistance for high-pressure fluid conveyance. Engineered for reliability in critical industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 4.6" |
| Outside Diameter | 1.986" |
| Wall Thickness | 0.455" |
Specified by design engineers worldwide, this brass seamless pipe adheres to stringent quality standards for demanding applications. It features a nominal pipe size of 4.6 inches, an exact outside diameter of 1.986 inches, and a substantial wall thickness of 0.455 inches, defining its Schedule 160 rating. The inherent properties of brass, including excellent corrosion resistance and good machinability, make this pipe suitable for a wide range of fluid handling systems where durability and integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe supports are installed at recommended intervals to prevent sagging and stress. 2. Use approved brass or compatible fittings and appropriate joining methods (e.g., brazing, threading) as per application requirements. 3. Conduct thorough pressure testing and leak detection after installation before bringing the system online.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible joining materials or methods. | Always consult material compatibility charts and use ASTM-approved joining techniques and filler materials for brass. |
| Inadequate pipe support leading to mechanical stress. | Adhere to industry-standard spacing for pipe hangers and supports to distribute weight and absorb vibration. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure fluid transfer systems, Hydraulic lines in demanding environments, Chemical processing and industrial plumbing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||