This Schedule 160 brass seamless pipe offers exceptional strength and corrosion resistance. Engineered for high-pressure applications, its robust construction ensures reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 1.9" |
| Outside Diameter | 3.298" |
| Wall Thickness | 0.167" |
Built to exacting engineering tolerances, this brass seamless pipe features a 1.9" nominal pipe size with a precise 3.298" outside diameter and a substantial 0.167" wall thickness, conforming to Schedule 160 requirements. Composed of high-grade brass alloys, it exhibits superior tensile strength, excellent machinability, and exceptional resistance to corrosion and dezincification, making it suitable for a wide array of industrial fluid handling systems where pressure and environmental integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or flux/solder as per application requirements. 3. Properly align and securely join pipe to fittings using calibrated torque or approved joining methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible joining methods for brass. | Always use joining methods (soldering, brazing, compression fittings) specifically rated and recommended for brass pipe to prevent premature failure or leaks. |
| Exceeding pressure or temperature ratings. | Consult material data sheets and application specifications to ensure the pipe's pressure and temperature capabilities are not exceeded. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure fluid transfer systems, Industrial instrumentation lines, Hydraulic and pneumatic lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||