This Schedule 160 brass seamless pipe is engineered for superior performance under high pressure and corrosive environments. Its robust construction ensures reliable fluid conveyance in critical applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 0.6" |
| Outside Diameter | 3.576" |
| Wall Thickness | 0.246" |
Built to exacting engineering tolerances, this brass seamless pipe boasts a 0.6" nominal pipe size, a precise 3.576" outside diameter, and a substantial 0.246" wall thickness, meeting Schedule 160 requirements. Composed of high-strength brass alloy, it offers excellent corrosion resistance to a wide range of fluids and exceptional durability. The seamless manufacturing process eliminates weld seams, guaranteeing uniform wall thickness and preventing potential leak paths, which is critical for high-pressure hydraulics, chemical processing, and marine environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate sealant or tape to threaded connections, if applicable. 3. Tighten fittings to manufacturer's recommended torque specifications, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings or sealants with brass. | Always verify compatibility of fittings and sealants with brass to prevent galvanic corrosion or material degradation. |
| Over-stressing the pipe during installation by excessive bending or improper support. | Support the pipe adequately and avoid sharp bends. Consult engineering drawings for proper support spacing and methods. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure hydraulic systems, Chemical processing and transfer, Marine and offshore fluid systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||