This Brass Seamless Pipe, Schedule 40, offers superior corrosion resistance and leak-proof integrity. Its robust construction ensures reliable fluid and gas conveyance in diverse industrial applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 1.9" |
| Outside Diameter | 3.910" |
| Wall Thickness | 0.297" |
Engineered for reliability and performance, this Brass Seamless Pipe adheres to stringent Schedule 40 specifications, ensuring consistent wall thickness and dimensional accuracy. With an outside diameter of 3.910 inches and a substantial wall thickness of 0.297 inches, it provides exceptional structural integrity. The inherent properties of brass, including excellent corrosion resistance and machinability, make this pipe suitable for a wide array of demanding fluid and gas transfer applications where material degradation is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free from debris. 2. Apply appropriate flux and solder to joint areas. 3. Heat joint evenly and allow solder to flow, creating a capillary seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect flux or solder for brass. | Always use flux and solder specifically designed for brass to ensure proper adhesion and joint integrity. |
| Overheating the pipe during soldering. | Avoid excessive heat, which can weaken the brass and compromise the joint. Heat the base metal, not the solder. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Hydraulic systems, Pneumatic lines, Corrosive fluid transfer, Instrumentation tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||