This premium brass seamless pipe offers superior corrosion resistance and smooth internal surfaces, ensuring efficient fluid conveyance in demanding applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 1.7" |
| Outside Diameter | 5.836" |
| Wall Thickness | 0.162" |
Built to exacting engineering tolerances, this 1.7" Schedule 40 brass seamless pipe features an outside diameter of 5.836" and a precise wall thickness of 0.162". The inherent properties of brass, including its excellent machinability, ductility, and resistance to dezincification and saltwater corrosion, make it suitable for a wide array of industrial and commercial fluid handling systems. Its seamless construction eliminates potential leak paths common in welded pipes, ensuring integrity under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to male threads. 3. Hand-tighten the fitting, then use a wrench for a final 1/2 to 3/4 turn, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect thread sealant for brass. | Utilize sealants specifically rated for brass to prevent galvanic corrosion. |
| Overtightening fittings, causing damage. | Follow recommended torque specifications or use a torque wrench for consistent results. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Water distribution systems, Hydraulic lines, Chemical processing, Marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||